Savage Boom Mowers
-
Reach Out from Centerline: 22 feet and 24 feet
-
Reach Up: 21 feet and 23 feet
-
Ax Cutterheads
-
60-inch cut ax head with 1-1/4 inch thick T-1 steel two position blade holders
-
50-inch cut ax head with 1 inch thick T-1 steel two position blade holder
-
Blades are 5/8 x 5 inch double edge
-
Replaceable 3/8 x 2-1/2 inch T-1 steel full length skids
-
Operator controlled hydraulic deck door
-
90 degree deck swivel to allow legal transport of 100 inches total width
-
Deck is made of 10 gauge A606 steel reinforced and with ½ inch sides
-
Operating rpm is 1250 for the 60 inch and 1950 for the 50 inch
-
Direct drive spindle is made of heat treated 4140 tool steel and is 7.5 inches od, has
-
2-5/8 inch id top bearing and a 3-5/8 inch id bottom bearing
-
Optional heads include 62 inch cut grass flail, 52-inch cut twin blade saw and 22-inch ditcher
-
Boom Cylinders are all welded and rated at 3000 psi
-
Main Boom is 8 x 6 x ¼ wall steel tube with ½ inch thick T-1 steel attachment points
-
Outer Boom is 6 x 4 x ¼ wall steel tube with ½ inch thick T-1 steel attachment points
-
Swivel is a helical acuator with 180 degrees of total travel, with 90 degrees forward and 90 degrees rearward.
![March 30-18 004.jpg](https://static.wixstatic.com/media/5d750e_d0bba2fe5cf44b0c96ec6705633ea7cb~mv2.jpg/v1/fill/w_470,h_352,al_c,q_80,usm_0.66_1.00_0.01,enc_auto/March%2030-18%20004.jpg)
![March 30-18 005.jpg](https://static.wixstatic.com/media/5d750e_631536cc56924f51bd22215f8f913670~mv2.jpg/v1/fill/w_469,h_352,al_c,q_80,usm_0.66_1.00_0.01,enc_auto/March%2030-18%20005.jpg)